BGMJX - FYRQUEL 220-MLT
- MSDS: BGMJX
- Manufacturer: STAUFFER CHEMICAL COMPANY
- Product Name: FYRQUEL 220-MLT
- National Stock Number: 9150-01-113-2047
Product Identification
Product ID:FYRQUEL 220-MLT
MSDS Date:01/01/1987
FSC:9150
NIIN:01-113-2047
MSDS Number: BGMJX
Responsible Party
Emergency Phone: (203) 226-6602
Cage: 8F554
Contractor
Telephone: 203-226-6602/CHEMTREC 800-424-9300
Cage: 8F554
Ingredients
BUTYLATED TRIPHENYL PHOSPHATE ESTERS (MIXED ISOMERS)
TRIPHENYL PHOSPHATE
CAS: 115-86-6
RTECS: TC8400000
OSHA PEL 3 MG/M3
ACGIH TLV: 3 MG/M3; 9192
ADDITIVES, TYPE NOT SPECIFIED - LESS THAN 1%.
Hazards
Effects of Overexposure:RESP.IRRITANT; DYSPNEA,PULMONARY EDEMA;SKIN &
EYE IRRIT; POSSIBLE CHOLINESTERASE INHIBITION (RBC)
First Aid
First Aid:INHAL:RMV TO FRESH AIR. IF NOT BRTHNG GIVE CPR; IF BRTHNG
DIFF GIVE OXYGEN. EYE:IMMED FLUSH W/PLENTY OF WATER. SKIN:WASH
W/SOAP&WATER. RMV CONTAM CLTHG&SHOES. INGEST:INDUCE VOMIT. RPT
UNTIL VOMIT IS C LEAR. NOTHG BY MOUTH IF UNCONSC. GET MEDICAL ATTN.
Fire Fighting
Flash Point:475F, 246C (COC)
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER. TO REMOVE FLAME
SOURCE.
Fire Fighting Procedures:WEAR FULL-FACE SELF-CONTAINED BREATHING
APP/IMPERV. CLOTHING
Unusual Fire/Explosion Hazard:FLUID MAY SUPPORT COMBUSTION & DECOMP
YIELDING TOXIC PRODUCTS (EG; PHOSPHORUS OXIDES)
Accidental Release
Spill Release Procedures:VENTILATE AREA. WEAR PROTECTIVE CLOTHING TO
PREVENT SKIN & EYE CONTACT. SOAK UP LIQ.W/SUITABLE ABSORBENT MATL
(EG: SAWDUST, CLAY, VERMICULITE). SWEEP MATL & PLACE IN SEALED
STEEL CONTAINER. LARGE SPIL LS SHOULD BE DYKED & PUMPED TO SALVAGE.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, WELL-VENTILATED
AREAS AWAY FROM FLAMMABLE MATLS, HEAT/FLAME SOURCES & FOODSTUFFS.
CARBON STEEL IS PREFERRED MATL FOR CONTAINERS.
Other Precautions:EXPOSURE MAY CAUSE CHOLINESTERASE INHIBITION.
ATROPINE IV IS ANTIDOTAL. 2-PAM IS ALSO ANTIDOTAL WHEN ADMINISTERED
EARLY & IN CONJUCTION WITH ATROPINE.// FLUID MAY SOFTEN SOME
PLASTICS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR OIL
MIST/VAPORS
Ventilation:RECOMMENDED ESP IF USE CONDITIONS GENERATE AEROSOLS/VAPORS.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
UPDATE PER NON-OSHA HCS MSDS DTD OCT 84
Chemical Properties
HCC:V6
Vapor Pres:0.1
Spec Gravity:1.15
Evaporation Rate & Reference:COLORLESS, CLEAR L
Solubility in Water:NEGLIGIBLE
Appearance and Odor:IQUID WITH ESSENTIALLY NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
MOISTURE, ACIDIC OR ALKALINE CONDITIONS. VERY HIGH TEMPS.
Stability Condition to Avoid:TEMP >150F & MOISTURE COMBINE TO CAUSE
SLOW HYDROLYSIS.
Hazardous Decomposition Products:PHENOL, ALKYL PHENOLS, ARYL PHOSPORIC
ACIDS WHEN HYDROLYZED.
Conditions to Avoid Polymerization:IN ABSENCE OF MOISTURE, FLUID
REMAINS STABLE TO HIGH TEMPS.
Disposal
Waste Disposal Methods:FOLLOW FED, STATE & LOCAL REGULATIONS. MFR
RECOMMENDS DISPOSAL OF SEALED CONTAINERS IN AN APPROVED LANDFILL,
INCINERATION BY A LICENSED OPERATOR W/APPROPRIATE POLLUTION
CONTROLS, OR SALVAGE & RECLAMAT ION IF QUANTITY JUSTIFIES.
RECLAMATION PREFERRED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.